Transient vibrations of a tau inclined cable with a riding accelerating mass

The objective of this paper is a theoretical and numerical study of the dynamics of a taut inclined cable with a riding accolerating mass, which is suspended from two points of different elevation. The moving mass is a trolley that is accelerated by a solid fuel rocket down the inclined cable and is aerodynamically brought to a halt. The thrust of the rocket is tangential to the deformed configuration of the cable.Methods of analysis consist of the dynamics of small deformations superimposed on the static catenary state. The problem is nonlinear due to presence of friction and the convective acceleration interaction of the moving mass and the cable. Galerkin's procedure for removal of spatial dependence and numerical integration are used to obtain convergent solutions.Deceased     

新型测发控系统方舱结构研究设计

移动测发控系统是实现航天装备快速进入空间需求的首要条件。针对我国现役运载火箭测发控周期较长、地面测试设备复杂、缺乏移动发射能力,在新一代快速发射运载火箭的研发中通过采用“设备集成、线缆集中铺设、人机工程优化、方舱结构为平台”等多项技术,研发出了新型移动快速测发控系统,实现了新一代运载火箭(≤一周左右)快速简易测发的目标。     

测发控系统方舱结构研究

把航天装备送入空间的快速发射,对测发控系统提出了便捷、移动要求;目前现役运载火箭测发控系统状态是系统复杂、难以移动,已不适应当前航天装备快速送入空间的发展,为此提出一种新型移动式测发控系统方舱结构模式;该模式采取了遵循设备集成原则,通过使用方舱、线缆铺设、人机工程优化等先进设计理念与方法来实现测发控系统快速、可移动的要求,同时解决了该系统原先存在多方面存在的问题;通过长期对系统方舱结构的研究工作,研发出通过采用“设备集成、线缆集中铺设、人机工程优化、方舱结构为平台”等先进技术的新型移动快速测发控系统方舱结构系统,为实现系统快速、可移动要求提供了技术基础;该系统经过工程使用,实现了新一代运载火箭快速简易测发控的目标。     

高温超导电缆液氮流道试验装置的设计计算

为了进行高温超导电缆冷却通道方式的实验比较 ,确定通道的结构形式 ,获得理论计算的试验值 ,为长距离电缆设计提供实验依据 ,建立了高温超导电缆液氮流道试验装置。文中叙述了流道试验装置的设计指标、系统流程、设计概算、试验装置主要设备设计计算以及调试结果等。     

Decreasing the Displacements of a Composite Saddle-Shaped Cable Roof

The structural possibilities of decreasing the compliance of a composite saddle-shaped cable roof having a compliant support contour are investigated. The use of a supporting contour consisting of cables joined together with tie-bars is considered as a structural method enabling one to decrease the compliance of the roof. Each cable of the support has its own initial flexure. The method is most efficient from the viewpoint of material consumption per unit of covered area relative to the increasing rigidity and prestress level of the cable net.The efficiency of the method was evaluated by a numerical experiment, which was carried out for a composite saddle-shaped cable roof 50 × 50 m in the plan. The roof was formed by two orthogonal cable groups joined with a compliant supporting contour. A hybrid composite cable based on a carbon-fiber-reinforced plastic, a glass-fiber-reinforced plastic, and steel was considered as a material for the cable net in combination with steel. The material consumption and the maximum vertical displacement of the cable net in relation to the initial geometrical characteristics of the supporting contour were obtained. A possibility of decreasing the maximum vertical displacements of the roof by 8% was established.     

Single-phase AC losses in prototype HTS conductors for superconducting power transmission lines

We report single-phase AC loss measurements on 8-, 4-, and 3-layer, multi-strand, HTS prototype conductors for power transmission lines. We use both calorimetric and electrical techniques. The agreement between the two techniques suggests that the interlayer current distribution in 1-m long conductors are representative of those in long conductors. The losses for the 8- and 4-layer conductors are in rough agreement, with the 8-layer losses being somewhat lower. The 3-layer conductor losses are substantially higher — probably due to unbalanced azimuthal currents for this configuration.     

HIRFL 束流相位测量系统性能的改进

 在研究HIRFL 相位测量系统工作原理的基础上, 用自行设计的电缆电子学长度校正方法校正了探针电缆的长度, 并重新设计了信号预选器和系统控制软件; 利用自行设计的自检系统找出并校正了影响系统测量精度的因素。提高了系统的可靠性和测量精度, 使系统可以投入实际的调束运行。     

The network approach to calculation of characteristic time constants of the flat two-layer superconducting cable

The matrix method was used to investigate the process of current decay in the samples of flat two-layer superconducting cables. The discrete spectrum of eigen-frequencies has been obtained. Each of these frequencies determines the rate of decay of the correspondent eigen-current. Despite of the increasing of the number of eigen-frequencies with the enlargement of the sample dimensions the spectrum remains finite, as the maximum and minimum frequencies tend to finite limits. An analysis made for the lowest eigen-frequencies showed the corresponding eigen-currents to be slowly decaying long current loops. Within the range of high frequencies the sinusoidal distribution of eigen-currents in the rows of the cable was observed.     

传输电缆对换能器阻抗特性的影响

本文通过传输线方法讨论了电缆对换能器的影响,随频率增加,电缆对换能器的影响交蛎,主要表现为,最大电导增大,串联谐振率下降,这些都是由于电缆传输系数随频率变化引起的,并且与换能器的阻抗特性有关。     

超导电缆的性能检测方法研究

超导电缆与常规电缆在电磁特性上有很大差异。因此,有必要对其试验内容、性能检测方法和试验设备进行研究和规范。文中从超导电缆的电磁特性出发,探讨了超导电缆的试验内容及性能检测方法,并重点介绍了超导电缆交流损耗的测量方法。